Best benchtop bandsaw in 2022

If you are a woodworker, whether a DIY warrior or a professional, then you understand the importance of having an efficient handsaw. Which is why you need to consider getting the best benchtop band saw available to make your life easier.

Not only will it enable you to cut your wood perfectly, but it will also reduce the need to chisel out those complex angles you need to make grand furniture or woodwork design.

Top Benchtop Bandsaws in 2021

NameMotorCutting DepthCutting WidthCutting AnglesPrice
WEN 3959 2.5-Amp 9-Inch Benchtop Band Saw2.5A 2500FPM motor3-1/2 inches1/8 to 3/8 inches0-45 degrees Check Price
Rikon 10-305 Bandsaw With Fence1/3 HP motor4-5/8 inches9-5/8 inches0-45 degrees Check Price
POWERTEC BS900 9 Inch Benchtop Bandsaw1/2 HP 2.5 Amps3-5/8 inches9 inches0-45 degrees Check Price
Laguna Tools MBAND1412-175 14 x 12 Bandsaw1.75 HP0-45 degrees Check Price
Grizzly G0555LX Deluxe Bandsaw1HP, 1725 RPM6 inches9 inches0-45 degrees Check Price

WEN 3959 2.5-Amp 9-Inch Benchtop Band Saw

This is one of the best band saws in the market currently. It has a 2.5-amp motor that rotates the blade up to 2500 feet per minute. It can also create cuts up to 3-1/2 inches deep and 9 inches wide. It uses a 59.5-inch blade to create cuts between 1/8 and 3/8 inches in size. It can be used on a spacious 12-1/4 x 11-7/8 inch work table, and it bevels up to 45 degrees. The kit comes with a 1/4-inch-wide blade, a 2-1/2 inch dust port, a rip fence, a miter gauge, and a two-year warranty.

Check this too: Best Hearing Protection For Lawn Mowing

The saw also has a fence for creating straight cuts, and an adjustable blade guard. The saw’s ball-bearings give the blade smooth operation and long-lasting life for years of dependable service.


  • 5 amp motor rotates
  • 5-inch dust port
  • two-year warranty


  • Collects dust for easy cleanup
  • Easy to use
  • The saw can make perfect angled cuts


  • Too small for commercial woodworking
Check Price on Amazon

Rikon 10-305 Bandsaw With Fence

The affordable bandsaw has a solid steel design, and the frame is made of a steel plate which is stronger than plastic frames. It has a cast iron table that creates a sturdy work surface. It has a rip fence that allows you to do free handwork. Additionally, a 1/3HP motor provides ample power for cutting bowl and pen blanks.

It also comes with a micro-adjustable guidepost, and you can raise and lower the guide post height with the turn of a handle. The saw is a favorite of woodworkers and hobbyists that do not require large cutting capacity and power for their projects or have limited shop space for a larger size bandsaw.

The saw package includes a tilting 0-45° table, rip fence, large blade tension knob, dust port for shop vacuum hookup, and safety paddle on/off switch.


  • 4-5/8″ Re-Saw Capacity
  • Edge Facing Thrust Bearings
  • Large Cast Iron Table
  • Safety Paddle Switch
  • Includes 2″ Tall Fence
  • 2-1/2″ (O.D.) Dust Port


  • Collects dust for easy cleaning
  • Made from durable material
  • Easy to use


  • Breaks down when used continuously
Check Price on Amazon

POWERTEC BS900 9 Inch Benchtop Bandsaw

This saw package comes with a 110 Volt 9” band saw, one miter gauge, and one 1/4” x 62-inch band saw blade. The saw is an essential woodworking tool for delivering precision cuts, cutting irregular shapes Up to 3-5/8 inches deep and nine inches wide, or ripping lumber into thinner pieces. The saw comes with a patented blade guard adjustment for quick and easy blade replacement.

It also has a blade tracking window and a 2” dust port that keeps the work area clean and clear from dust. The bandsaw has quick adjustments knob, a table with a rack, and pinion adjustment for easy 45 Degree angle tilt.


  • Patented blade guard
  • Table with rack
  • Pinion adjustment


  • Easy to use
  • Is safe for amateurs
  • Can cut complex angles


  • The saw blade is too small
Check Price on Amazon

Laguna Tools MBAND1412-175 14 x 12 Bandsaw

The Laguna bandsaw has a 4 HO motor that runs on  115 V. it comes with a 6-foot cord and it is CSA certified. It also has an illuminated on and off direct start switch with a safety key. It also has a pre-Wired 115V outlet for light. The saw has a steel frame cast with a pyramid spine, cast iron wheels, and a cast-iron 211/2″ X 16″ micro-polished table surface. The saw package comes with a 12″ throat capacity and an aluminum rip fence. It also has a heavy-duty Cast Iron Trunion and Table Tilts.

The saw’s wheels are electronically balanced and fitted with polyurethane one-piece tires designed to run cooler and last longer than conventional tires. The worm gear and pinion are ultra-smooth and engineered to have minimum flex even when fully extended.


  • Illuminated on/off direct start switch
  • Safety key
  • Pre-Wired 115V outlet for light
  • Steel frame
  • Cast iron wheels
  • Aluminum rip fence
  • Cast Iron Trunion


  • Made from durable material
  • Easy to use
  • Can make complex angle cuts


  • The adjustment knob does not work with the lower blades
Check Price on Amazon

Grizzly G0555LX Deluxe Bandsaw

This bandsaw is an all ball-bearing construction. Made from a sturdy and durable cast iron frame. As well as a precision-ground cast iron table. The saw is CSA certified, and it has computer balanced cast iron wheels with rubber tires. For easier movement and durability. It also has upper and lower ball bearing blade guides and thrust bearings. For easier angle adjustments and usage. The saw package includes a blade, an extruded aluminum fence, and a miter gauge.


  • Upper and lower ball bearing blade guides
  • rack-and-pinion guidepost
  • Cast iron frame
  • Precision-ground cast iron table
  • Computer balanced cast iron wheels with rubber tires
  • Dust port
  • Open frame stand


  • Easy to use
  • No dust buildup at the work station
  • Made from sturdy material


  • The blade guard is inefficient
Check Price on Amazon


Make sure you look at band saw reviews to make it easier to pick out the best benchtop band saw available in the market. It will save you the headache of having to buy replacement bits or sending the broken saw back to the manufacturer.